Skip to content 
Model 2500
Model 2500
Benchtop “Two-Pressure” Humidity Generation System
The Model 2500 Benchtop Humidity Generator is a self contained system capable of producing atmospheres of known humidities using the fundamental, NIST proven, “two-pressure” principle. This system is capable of continuously supplying accurately known humidity values for instrument calibration, evaluation, and verification, as well as for environmental testing. Simply apply power and the 2500 will power-up ready to generate. Humidity setpoint values are input by the operator from the front panel keypad and are limited only by the range of the 2500 humidity generator. Relative humidities are calculated from the measurements of pressure and temperature with the formula:
%RH= fs/ fc · es/ ec · Pc/ Ps · 100
To generate a known humidity, the computer controls the pressure ratio Pc /Ps utilizing the enhancement factor ratio fs/fc and the effective degree of saturation es/ec. Humidity produced is solely dependent on the measurement of pressures and temperatures and does not rely on any other device (such as a dew point hygrometer, psychrometer, or humidity sensor) for the measurement of water vapor content. Precision humidity generation is determined by the accuracy of the pressure measurements and on the accuracy and uniformity of temperature throughout the generating system.
FEATURES
- 0.5 %RH Uncertainty 1
- Traceable to SI 3
- Self Contained and Mobile
- Automated Control of User Setpoints
- 2500 ControLog® Automation Software
- HumiCalc® with Uncertainty Software
- Computerized Internal Transducer Calibration
- RS-232C Serial Interface
- Low Noise Air Compressor with Air Dryer (Option)
| Relative Humidity Range: | 10 to 95 %RH |
|---|---|
| Relative Humidity Uncertainty: @ P c T c 1 | 0.5 %RH |
| Chamber Fluid Temperature Range: | 0 to 70 ºC |
| Chamber Fluid Temperature Range: (Optional) | –10 to 70 ºC |
| Chamber Temperature Uniformity: 2 | ±0.1 ºC |
| Chamber/Saturation Temperature Uncertainty: 1 | 0.06 ºC |
| Pre-Saturator/Expansion Valve Temperature Uncertainty: 1 | 0.20 ºC |
| Chamber Pressure Uncertainty: 1 | 0.15% FS |
| Chamber Pressure Range: | Ambient |
| Display Resolution: | 0.01 |
| Gas Flow Rate Range: | 5 to 20 L/min |
| Gas Flow Rate Resolution: | 0.02 L/min |
| Gas Flow Rate Uncertainty: 1 | 2% FS |
| Gas Type: | Air or Nitrogen |
| Gas Pressure Rating (MAWP): | 175 psiG |
| Heating: | Stainless Steel Immersion Heater |
| Heating/Cooling Rate: | 2.5 Minutes Per ºC Average |
| Cooling: | 1/3 hp R-134A Refrigeration System |
| Chamber Window: | 6" H x 6" W (152 mm x 152 mm) |
| Chamber Dimensions: | 15" H x 15" W x 12" D (38.1 cm x 38.1 cm x 30.5 cm) |
| Physical Dimensions: | 22" H x 36" W x 23" D (55.8 cm x 91.4 cm x 58.4 cm) |
| Physical Dimensions of Cart: | 33.25" H x 43" W x 26" D (84.5 cm x 109.2 cm x 66.0 cm) |
| Physical Dimensions 2500 with Cart: | 56" H x 43" W x 26" D (142 cm x 109 cm x 66 cm) |
