| (dew point sensor) | Accuracy: ±2°C temperature corrected |
| Repeatability: 0.8°C |
| Response time: 95% of step change in 3 min. |
| Sample flow: >1 LPM |
| Temperature Sensor | Range: -40°C to +70°C |
| Accuracy: ±2°C |
| Ergonomics | Easy and quick installation, no tools required |
| Electrical | 5VDC to 28VDC two wire loop operation 4mA to 20mA |
| Housing isolated from 4-20mA Loop |
| Measurement resolution of moisture sensor: 1pF resulting in less than 0.01 ̊C |
| 5 pin M12 industrial connector IP68 when mating connector fully engaged |
| Mating connectors with molded cables approved for Hazardous Location use available |
| Two conductor cable min. 24AWG (for total cable length >1mile min. 20AWG) To meet CE requirements cable must be shielded. |
| Built-in digital I/O for optionally controlling relays |
| Mechanical | All 316 Stainless Steel and PTFE wetted parts for fast response time. |
| Enclosure all stainless steel construction IP67 protection when installed |
| Dimensions (overall) including connector- L: 3.25″ (82.6mm) Dia: 1.62″ (41.3mm) |
| Process threads 3/4″-16 and 14mm x 1.25mm Oring-Seal and 1/4″NPT, can install with either threads |
| Weight Total: 6 oz (0.17 Kg) |
| Pressure: 5000 PSIA (345 Bar) |
| Temperature Range | PLMa Analyzer: -20°C to +60°C |
| Electronics: -40°C to +85°C |
| Moisture Sensor: -20°C to +60°C |
| Miscellaneous Features | NIST traceable calibrations |
| Units of measure: °C & °F dewpoint, ppmV, ppmW, µB H2O vapor pressure, grams of H2O / m3, |
| Lbs H2O / 106 standard cubic feet in Natural Gas. |
| Digital & Analog: Two Wire 4/20mA loop with HART® |
| Transmitter stores all HART setup |
Skip to content 
